How to Find Your Real Electricity Rate
Every calculator on this site is only as good as the rate you feed it — and the rate is the number suppliers make hardest to find. It hides in tariff tables, small print and app screens, often split into pieces. This guide shows where it lives on real bills and tariffs in our four launch countries, and what to do when there are several rates instead of one.
Your electricity rate is a single number with an outsized effect: every calculation on this site multiplies by it, so a rate that is wrong by a tenth makes the answer wrong by a tenth. That is why finding it is worth doing carefully, and why the fastest route is usually the bill you already have. The rate printed on the bill is the rate you actually pay, and no published average, however reputable, can replace it for a calculation about your own home.
Published averages still have a use. They are what you use when there is no bill to hand, when you are comparing regions, or when you want to know whether your own rate is high or low. The rates register on this site lists them by region, with their sources, and this guide shows how to use them without mistaking them for your tariff.
The calculators linked at the end of this guide are the tools for the method in this guide: Electricity Cost Calculator, Electricity Bill Estimator. Use them first with the numbers from the worked scenario above, and then again with your own numbers, and keep both answers. The first run checks that you have understood the method, because it should reproduce the scenario; the second run gives you the answer for your own home, and it is the one to act on. If the two runs disagree by more than you expect, the difference is in an input, and the field help text on the calculator will tell you which one to check first.
The fastest route: divide a recent bill
Take a recent bill, subtract any balance carried forward, and divide the total energy-related amount by the kWh used. The result is your effective rate — energy and standing charge combined. It is the right input for quick estimates and tariff comparisons.
For precise work — modelling one appliance, or a single period — you want the pure unit rate instead, because the standing charge does not change when you use one kWh more or less.
Where the unit rate is printed
If several per-kWh lines exist, add them for the full marginal rate. If a charge is per day or per bill, it belongs to the standing-charge input, not the rate.
- UK: the "Tariff information" or "About your tariff" box lists the unit rate in p/kWh and the standing charge in p/day, exclusive or inclusive of VAT as stated.
- US: the bill's rate schedule line (e.g. "Residential service — energy charge") or the supplier's published tariff sheet; many bills bundle delivery and supply charges into separate per-kWh lines that must be added.
- Canada: provincial utility tariff pages publish the per-kWh energy charge; some provinces add delivery and regulatory charges as separate per-kWh or fixed lines.
- Australia: the bill shows a usage charge in c/kWh and a daily supply charge; your retailer's energy price fact sheet states both plainly.
Time-of-use tariffs: several rates, one routine
With peak and off-peak rates there is no single "your rate" — there is a rate per period, and your answer depends on when you use power. Use the rate for the hours you are modelling: overnight rate for EV charging, daytime rate for solar self-use. Dwellario's Bill Estimator has a dedicated two-rate mode for whole-bill estimates.
No bill handy? Use a published average — labelled as such
Our calculators offer presets drawn from official sources: EIA residential averages for the US, Hydro-Québec's city comparison for Canada, and the Ofgem price cap for Great Britain. These are starting points for exploration, dated and sourced on the Methodology page — they are not your tariff, and your own bill always beats them. Australian reference prices are set per network and have not been re-verified against the regulator's primary document, so we deliberately ship no Australian preset.
A worked scenario, step by step
Suppose you have a bill for 1,000 kWh and the energy part of it is 181.90. Divide the money by the energy: 181.90 divided by 1,000 is 0.1819, and that is your unit rate, in the currency of the bill. That is the whole method, and it works on any bill, in any currency, provided the figure you divide is the energy charge alone and not the whole bill: if you divide the whole bill, including the standing charge, by the kilowatt-hours, you get the effective rate, which is a different and also useful number, but it is not the tariff rate to enter in a calculator.
Now compare two households that both used 1,000 kWh. One is in North Dakota, where the register lists a residential average of 0.1246 per kWh, so 1,000 kWh costs 124.60. The other is in Hawaii, where the register lists 0.4641 per kWh, so the same 1,000 kWh costs 464.10. The difference is 464.10 minus 124.60, which is 339.50, for exactly the same amount of electricity. The Washington average of 0.1442 gives 144.20 for 1,000 kWh, and the Massachusetts average of 0.3019 gives 301.90. Those four numbers are the reason this guide insists on your own rate: the spread between regions is wider than the saving most households can make by changing how they use electricity.
If your bill does not show a unit rate at all, work backwards from the energy charge as above, and write the rate down with the date of the bill. Rates change, and a rate written down with its date is still useful a year later, because you can see how much it has moved and re-run any calculation that used it.
Common traps
These are the mistakes that produce a wrong rate and therefore a wrong answer in every calculator that uses it:
- Dividing the whole bill, standing charge included, by the kilowatt-hours and calling the result the tariff rate. That gives the effective rate, which is higher, and entering it as the tariff rate double-counts the standing charge.
- Using a rate from a different country or a different year without noticing the currency or the date. A rate in pence is not a rate in cents, and a rate from two years ago is not a rate today.
- Using the rate for the wrong tariff: a time-of-use tariff has more than one rate, and the single rate on the front page of a bill is not the whole story. This guide has a section on time-of-use tariffs for exactly that case.
- Trusting a rate quoted in an advertisement. Advertised rates are often the cheapest rate, for the cheapest hours, with conditions attached, and they are not the rate on your bill.
Decision checklist
Use this list the first time you find your rate, and again whenever a new bill arrives with a different one:
- Find the energy charge and the kilowatt-hours on the same bill, and divide the first by the second.
- Check whether the bill has a standing charge, and keep it separate from the rate.
- Write the rate down with the bill date and the tariff name.
- Compare it with the register averages for your region, and ask why it differs if it differs a lot.
- Enter it in the calculator you are using, and re-run the calculation if the rate changes.
From one rate to a year of cost
A rate becomes real when you multiply it by a year of use. The Canadian comparison in the category pages on this site is quoted at 1,000 kWh a month, which is 12,000 kWh in a year. At the Montreal rate of 0.0829 per kWh, that year costs 12,000 times 0.0829, which is 994.80. At the Calgary rate of 0.2290 per kWh, the same year costs 12,000 times 0.2290, which is 2,748.00. The difference is 2,748.00 minus 994.80, which is 1,753.20, for the same amount of electricity in the same country. That is why this guide treats the rate as the first number to find and the last number to trust: it is the multiplier for everything else.
The same multiplication is how you should test any rate you are offered. A tariff that looks cheap per unit can be expensive over a year if it carries a high standing charge, and a tariff that looks expensive per unit can be cheap if its standing charge is low and your use is low. The test is the same in both cases: take your own annual use in kilowatt-hours, multiply it by the unit rate, add the standing charge multiplied by 365 days, and compare the total with the same calculation for the other tariff. The register values on this site are the starting points for that comparison, and your own bill is the source for your own use.
Write the rate down when you find it, with the date and the tariff name, and keep it with the bill. A rate without a date is a number without a context, and rates change: the United States national reference rate in the register is 0.1819 per kWh, and the state averages around it run from 0.1246 in North Dakota to 0.4641 in Hawaii, which is a reminder that a national average is not a local price. Your own rate, written down with its date, is the only rate that describes your home.
Try it with your own numbers
Sources
- U.S. EIA, Electric Power Monthly, Table 5.6.B (residential average prices, 2026 year-to-date).
- Hydro-Québec, Comparison of Electricity Prices in Major North American Cities 2025 (rates in effect 1 April 2025).
- Ofgem, Energy price cap unit rates and standing charges, 1 October – 31 December 2026 (announced 26 August 2026; read from Ofgem directly).