Calculator category

Water Costs

Water looks cheap on the bill and expensive in the boiler cupboard: the water itself is usually the smallest part of what water costs a household. Sewer charges follow it out, and the energy to heat the hot share is often the largest of the three.

This category prices all three parts from your own tariff, so a long shower and a dripping tap get honest numbers.

The Water Costs category holds 1 calculator: Water Usage Cost Calculator. Each one answers a part of the same question, and together they answer the whole of it. The point of the category is not to give you separate answers that do not agree with each other, but to give you one answer that you can trust, built from the parts that matter most in your own home.

Start with Water Usage Cost Calculator. It is the calculator in this category that takes the broadest view, and its result is the number the other calculators refine. Run it first, with the numbers from a recent bill, and write the result down: it is the baseline against which every other figure in the category should be judged, and it is the figure to come back to when a later calculation surprises you.

Then use the other calculators in the category to break that baseline down. Water Usage Cost Calculator takes one part of the total and works it out in detail, so you can see whether that part is large because the quantity is large, because the rate is high, or because the efficiency is low. That is the question this category is really asking, and it is the question that decides what to do next, because the remedy for a large quantity is different from the remedy for a high rate.

Before you run any of these calculators, gather the numbers they all need. The first is water used, and the second is your rate, taken from a recent bill rather than from a preset average. With those two numbers in hand, every calculator in this category gives you an answer about your home; without them, it gives you an answer about an average home, and the difference between the two is often larger than the saving you are trying to measure.

Calculators in this category

What drives the cost

  • Your volumetric tariff — set locally, which is why no honest website can ship a universal default.
  • Sewer or wastewater charges, frequently levied as a percentage of the water charge or per volume returned.
  • The hot share: heating water takes 1.163 Wh per litre per degree — physics that makes hot water an energy product.
  • Fixed meter and service charges, which this category's calculator deliberately excludes so the volumetric truth stays visible.
  • The result in this category is most sensitive to the quantity you enter first, because the formula multiplies by it. A quantity that is wrong by a tenth makes the answer wrong by a tenth, and no amount of precision in the other inputs can repair that.

Ways to save

  • Fix drips: a tap dripping once a second wastes thousands of litres a year — water you may also have heated.
  • Shorter showers and aerating heads cut water, sewer and heating costs simultaneously.
  • Run washing machines and dishwashers full, on eco cycles, which save hot water as well as electricity.
  • If you have a garden meter or irrigation deduction, check whether your utility excludes outdoor water from sewer charges.
  • Re-run the calculators in this category together whenever one of their shared inputs changes. A new rate, a new appliance or a new pattern of use changes every calculator that uses it, and running them together is how you keep the answers consistent with each other.

Country differences

US bills commonly price per 1,000 gallons or per CCF (100 cubic feet); UK and Australian bills price per cubic metre; the calculator accepts m³, litres and US gallons, priced per m³ or per 1,000 gallons.

In England and Wales, sewerage is commonly charged on an assumption that ~90% or more of supplied water returns to the sewer — the pattern behind the calculator's percentage model; your own bill states your utility's basis.

Frequently asked questions

Why is the heating part bigger than the water part?

Because energy is dearer than water per unit. Heating 5,000 litres by 40 °C takes about 233 kWh of energy; at typical electricity prices that alone can exceed the cost of 10 m³ of water.

Where do I find my water tariff?

On your bill or your utility's published tariff sheet, usually as a price per m³, per 1,000 gallons or per CCF (1 CCF ≈ 2,832 litres). Enter it exactly as billed.

Does this include my meter charge?

No — fixed charges are excluded so the cost of the water itself stays clear. Add them in the Home Running Cost Calculator for a whole-home total.

Where should I start in the Water Costs category?

Start with Water Usage Cost Calculator, using the numbers from a recent bill, and write the result down. Then run Water Usage Cost Calculator for the part of the total you most want to understand, and compare its result with the first calculator result. If the two disagree, check the inputs they share, the quantity and the rate, before you trust either answer.

Explore other categories